The CSC-3PLY’s pure copper+stainless steel+pure copper construction ensures high strength characteristics and excellent springiness. Most importantly, the eco-friendly CSC-3PLY is being used where beryllium copper was previously used due to its environmental impact.
The CSCS-3PLY is made of stainless steel+pure copper+stainless steel, which provides excellent heat dissipation compared to conventional stainless steel monomaterials. And of course, stainless steel on both sides ensures strength and durability.
The NSN-3PLY is a combination of amorphous material, which is effective in blocking electromagnetic waves, and stainless steel, which ensures strength, making it the ideal material for the Shield Can in cell phones.
Electrical-Electronics Automobile Communication·Mobile Water purifiers Kitchen Construct We want to achieve innovation together in this field.
At CS-Tech, we support technology and product-specific characteristics so that it can be applied across each industrial field, focusing on clad metal, an innovative material.
CSC-3PLY는 동클래드의 한 종류로서, 동 사이에 스테인리스를 넣어 압연 제작합니다. 압연하는 스테인리스의 종류에 따라 물성치를 조정이 가능하며, 경우에 따라 인청동 및 베릴륨동과 동등 수준의 물성치로 제작 가능하며, 전기전도도 향상을 시키며 원가 절감이 가능합니다.
No Data Found
No Data Found
Type | CSC-3PLY (Copper + Stainless + Copper) | ||
---|---|---|---|
Base material | SUS 304(L), 409(L), 439 | Thickness (mm) | 0.1 ~ 1.5 |
Layer material | Cu 1020, 1100, 7521 | Width (mm) | ≤580 |
Available Form | Coil, Sheet |
SCS-3PLY는 스테인리스 클래드의 한 종류로서, 스테인리스 사이에 동을 넣어 압연 제작합니다. 스테인리스의 비해 뛰어난 열전도성을 가지면서 스테인리스의 우수한 강도를 확보한 소재로서, 표면이 스테인리스로 이루어져 있어 내식성이 뛰어나 제한적인 공가의 고강도 방열성이 필요한 곳에 사용됩니다.
No Data Found
No Data Found
Type | SCS-3PLY (Stainless + Copper + Stainless) | ||
---|---|---|---|
Base material | Cu1100, 1220 | Thickness (mm) | 0.1 ~ 1.6T |
Layer material | SUS 304(L), 409(L), 316(L), 439 | Width (mm) | ≤580 |
Available Form | Coil, Sheet |
NSN-3PLY는 백동 클래드의 한 종류로서, 백동 사이에 마일드 스틸을 넣어 압연 제작합니다. 기존의 백동 비해 원가 20%와 향상된 차폐 효과를 지니며, 백동 표면은 기존 구리 표면과 달리 우수한 내부식성을 유지할 수 있습니다.
적용 제품 : 차폐 쉬드캔, 항균 제품
No Data Found
No Data Found
Type | NSN-3PLY (Nickel Silver+ Stainless + Nickel Silver) | ||
---|---|---|---|
Base material | SUS 300 series, 400 series | Thickness (mm) | 0.1 ~ 1.0T |
Layer material | Ni 02201 | Width (mm) | ≤580 |
Available Form | Coil, Sheet |
Choose your language from the list below, and it
will be translated into that language.
CSC-3PLY is a type of copper clad, manufactured by rolling stainless steel between copper. The physical properties can be adjusted depending on the type of stainless steel being rolled, and in some cases, it can be manufactured with physical properties equivalent to those of phosphor bronze and beryllium copper, improving electrical conductivity and reducing costs.
No Data Found
No Data Found
Type | CSC-3PLY (Copper + Stainless + Copper) | ||
---|---|---|---|
Base material | SUS 304(L), 409(L), 439 | Thickness (mm) | 0.1 ~ 1.5 |
Layer material | Cu 1020, 1100, 7521 | Width (mm) | ≤580 |
Available Form | Coil, Sheet |
SCS-3PLY is a type of stainless steel clad, manufactured by rolling copper between stainless steel. It is a material that has excellent thermal conductivity compared to stainless steel while securing the excellent strength of stainless steel. Since the surface is made of stainless steel, it has excellent corrosion resistance and is used in places where high-strength heat dissipation with limited work cost is required.
No Data Found
No Data Found
Type | SCS-3PLY (Stainless + Copper + Stainless) | ||
---|---|---|---|
Base material | Cu1100, 1220 | Thickness (mm) | 0.1 ~ 1.6T |
Layer material | SUS 304(L), 409(L), 316(L), 439 | Width (mm) | ≤580 |
Available Form | Coil, Sheet |
NSN-3PLY is a type of cupronickel clad, manufactured by rolling mild steel between cupronickel. It costs 20% more than conventional cupronickel and has improved shielding effectiveness, and unlike conventional copper surfaces, the cupronickel surface can maintain excellent corrosion resistance.
Applicable products: Shielded sheath cans, antibacterial products
No Data Found
No Data Found
Type | NSN-3PLY (Nickel Silver+ Stainless + Nickel Silver) | ||
---|---|---|---|
Base material | SUS 300 series, 400 series | Thickness (mm) | 0.1 ~ 1.0T |
Layer material | Ni 02201 | Width (mm) | ≤580 |
Available Form | Coil, Sheet |