SA-2PLY is a material that improves machinability by cladding aluminum on stain that is not easy to process, and stainless steel is used on the surface, which is more corrosion-resistant than commonly used steel panels. It’s also lighter than stainless steel, making it easier to construct.
The AMA-3PLY is made of mild steel with aluminum cladding on both sides, and the magnetic properties of the steel allow for induction use. Of course, aluminum’s excellent thermal conductivity also allows for a wide range of colors on both sides.
You can also save money by using iron, which is cheaper than aluminum.
CSC-3PLY and CS-2PLY are stainless steel with a pure copper cladding.
The semi-permanent appearance of oxidation coloring gives the same look as solid bronze, but with the high strength and durability of stainless steel and the ease of machining. It also weighs relatively little, making construction more convenient. In addition to these quality advantages, our copper clad building materials are also more affordable than solid copper.
In the case of pure copper, which is widely used in roofing materials and gutters, the soft nature of the material causes the joints (where the pieces are embedded) to expand, causing them to fall out of the structure, dents, holes, and other defects.
However, CS-2PLY is a revolutionary material that solves this problem with its stainless steel bonded construction and allows for a more advanced form of copper roofing.
TA-2PLY, a combination of titanium and aluminum, is a superlative building material with ultra-light weight, high weather and corrosion resistance, and cost savings of about 50% or more compared to pure titanium, while preserving the properties of pure titanium.
Electrical-Electronics Automobile Communication·Mobile Water purifiers Kitchen Construct We want to achieve innovation together in this field.
At CS-Tech, we support technology and product-specific characteristics so that it can be applied across each industrial field, focusing on clad metal, an innovative material.
SA-2PLY는 스테인리스 클래드의 한 종류로서, 스테인리스와 알루미늄을 압연 제작합니다. 스테인리스의 비해 뛰어난 열전도성을 가지면서 스테인리스의 우수한 강도를 확보한 소재로서 한 쪽 표면이 스테인리스로 이루어져 있어 내식성이 뛰어납니다. 또한, 스테인리스 대비 경량화가 가능합니다.
No Data Found
No Data Found
Type | SA-2PLY (Stainless + Aluminum) | ||
---|---|---|---|
Base material | Al 1050, 3003, 5052 | Thickness (mm) | 0.6 ~ 6.5T |
Layer material | SUS 304, 316L, 439 | Width (mm) | ≤1219 |
Available Form | Coil, Sheet |
AMA-3PLY는 알루미늄 클래드의 한 종류로서, 알루미늄 사이에 마일드 스틸을 넣어 압연 제작합니다. 기존의 철에 비해 가벼우며 알루미늄에 비해 강도가 우수해 공간이 제한적인 고강도 경량화 소재에 적합합니다. 또한 건축외장재로서 사용하여 알루미늄 대비 원가절감이 가능한 소재입니다.
No Data Found
No Data Found
Type | AMA-3PLY (Aluminum + Mild Steel + Aluminum) | ||
---|---|---|---|
Base material | Mild steel | Thickness (mm) | 0.6 ~ 2.5 |
Layer material | Al 1050, 3003 | Width (mm) | ≤1219 |
Available Form | Coil, Sheet |
CSC-3PLY는 동클래드의 한 종류로서, 동 사이에 스테인리스를 넣어 압연 제작합니다. 압연하는 스테인리스의 종류에 따라 물성치를 조정이 가능하며, 경우에 따라 인청동 및 베릴륨동과 동등 수준의 물성치로 제작 가능하며, 전기전도도 향상을 시키며 원가 절감이 가능합니다.
No Data Found
No Data Found
Type | CSC-3PLY (Copper + Stainless + Copper) | ||
---|---|---|---|
Base material | SUS 304(L), 409(L), 439 | Thickness (mm) | 0.1 ~ 1.5 |
Layer material | Cu 1020, 1100, 7521 | Width (mm) | ≤580 |
Available Form | Coil, Sheet |
CS-2PLY는 동 클래드의 한 종류로서, 동과 스테인리스를 압연 제작합니다. 동의 분율을 조정함으로써 열전도율을 향상시키거나 원가절감을 할 수 있는 소재입니다. 내측은 스테인리스 외측은 동으로 형상을 제작한 주방용품이나 정수기용 모듈에 사용됩니다.
No Data Found
No Data Found
Type | CS-2PLY (Copper + Stainless) | ||
---|---|---|---|
Base material | SUS 304(L), 409(L), 430, 439, 409L | Thickness (mm) | 0.1 ~ 1.2 |
Layer material | Cu 1020, 1100, 1220 | Width (mm) | ≤580 |
Available Form | Coil, Sheet |
TA-2PLY는 티타늄 클래드의 한 종류로서, 티타늄과 알루미늄을 압연 제작합니다. 기존의 티타늄에 비해 원가 40%와 경량화 30%가 가능한 소재이며, 기존 티타늄의 내부식성과 아름다운 표면을 유지한 소재입니다.
적용 제품: 건축외장재, 주방용품
No Data Found
No Data Found
Type | TA-2PLY (Titanum + Aluminum) | ||
---|---|---|---|
Base material | Al 1050 | Thickness (mm) | 0.7 ~ 3.0T |
Layer material | Titanum | Width (mm) | ≤950 |
Available Form | Coil, Sheet |
Choose your language from the list below, and it
will be translated into that language.
SA-2PLY is a type of stainless steel clad, manufactured by rolling stainless steel and aluminum. It is a material that has excellent thermal conductivity compared to stainless steel while securing the excellent strength of stainless steel. One surface is made of stainless steel, so it has excellent corrosion resistance. Additionally, it is possible to be lighter than stainless steel.
No Data Found
No Data Found
Type | SA-2PLY (Stainless + Aluminum) | ||
---|---|---|---|
Base material | Al 1050, 3003, 5052 | Thickness (mm) | 0.6 ~ 6.5T |
Layer material | SUS 304, 316L, 439 | Width (mm) | ≤1219 |
Available Form | Coil, Sheet |
AMA-3PLY is a type of aluminum clad, made by rolling mild steel between aluminum. It is lighter than conventional steel and has superior strength compared to aluminum, making it suitable for high-strength, lightweight materials with limited space. In addition, it is a material that can be used as a building exterior material to reduce costs compared to aluminum.
No Data Found
No Data Found
Type | AMA-3PLY (Aluminum + Mild Steel + Aluminum) | ||
---|---|---|---|
Base material | Mild steel | Thickness (mm) | 0.6 ~ 2.5 |
Layer material | Al 1050, 3003 | Width (mm) | ≤1219 |
Available Form | Coil, Sheet |
CSC-3PLY is a type of copper clad, manufactured by rolling stainless steel between copper. The physical properties can be adjusted depending on the type of stainless steel being rolled, and in some cases, it can be manufactured with physical properties equivalent to those of phosphor bronze and beryllium copper, improving electrical conductivity and reducing costs.
No Data Found
No Data Found
Type | CSC-3PLY (Copper + Stainless + Copper) | ||
---|---|---|---|
Base material | SUS 304(L), 409(L), 439 | Thickness (mm) | 0.1 ~ 1.5 |
Layer material | Cu 1020, 1100, 7521 | Width (mm) | ≤580 |
Available Form | Coil, Sheet |
CS-2PLY is a type of copper clad, manufactured by rolling copper and stainless steel. It is a material that can improve thermal conductivity or reduce costs by adjusting the copper fraction. It is used in kitchen appliances and water purifier modules that are made of stainless steel on the inside and copper on the outside.
No Data Found
No Data Found
Type | CS-2PLY (Copper + Stainless) | ||
---|---|---|---|
Base material | SUS 304(L), 409(L), 430, 439, 409L | Thickness (mm) | 0.1 ~ 1.2 |
Layer material | Cu 1020, 1100, 1220 | Width (mm) | ≤580 |
Available Form | Coil, Sheet |
TA-2PLY is a type of titanium clad, manufactured by rolling titanium and aluminum. It is a material that can reduce costs by 40% and reduce weight by 30% compared to existing titanium, and maintains the corrosion resistance and beautiful surface of existing titanium.
Applicable products: Building exterior materials, kitchenware
No Data Found
No Data Found
Type | TA-2PLY (Titanum + Aluminum) | ||
---|---|---|---|
Base material | Al 1050 | Thickness (mm) | 0.7 ~ 3.0T |
Layer material | Titanum | Width (mm) | ≤950 |
Available Form | Coil, Sheet |