automobile

Precision Engineering for a Better World

Copper Clad

Oil cooler

Applicable Steel Grade :

It is under development to reduce the number of processes, reduce costs, and improve quality by departing from the existing copper brazing method utilizing Cu filler. In particular, in oil cooler manufacturing, productivity can be improved by reducing the number of steps in the process of using copper thin plates and achieving the same level of functionality as conventionally manufactured products.

Busbar

Applicable Steel Grade :

The high proportion of copper in electrical components has traditionally been a barrier to lightweighting, and joining aluminum with cladding provides a solution to that problem. The use of aluminum in the base material allows the product to be lightweight while maximizing its electrical properties.

Stainless steel clad

Exhaust

Applicable Steel Grade :

It is a functional material that meets the current trend of lightweighting by aiming to reduce weight and improve NVH (radiated noise) performance compared to existing materials of stainless steel and SACD specifications. The corrosion resistance of traditional stainless steel and the lightweight, sound-absorbing properties of aluminum can be combined to further improve the performance of exhaust products.

Tail Trim

Applicable Steel Grade :

Lightweight and better formability than conventional stainless products, it can be applied to a variety of designs, focusing on the lightweight effect of aluminum and the corrosion resistance of stainless steel.

Iron Clad

Clutch Friction Plate

Applicable Steel Grade :

It is being developed with the aim of applying it to clutch friction plates that require high strength + high heat dissipation by breaking away from the existing casting method of manufacturing.

Oil pan

Applicable Steel Grade :

It was developed with the aim of improving performance for import substitution effect and lightweight compared to imported laminated steel sheets (Nippon Steel), and is a functional product that solves both lightweight and strength problems.

Bearing

Applicable Steel Grade :

This product was developed with the main purpose of realizing lightweight by applying it to high-strength bearing parts without using conventional casting materials. The heat dissipation effect of friction and its light specific gravity make it an ideal material for parts that require light weight, such as electric vehicles.

Dash Panel

Applicable Steel Grade :

Compared to the existing SGCC high tensile steel specification, this product was developed with the goal of lightweight and improved NVH (noise transmission) performance. The main objective of development is to ensure that the properties of each material bonded together meet the customer’s requirements for lightweight and strength.

Aluminum Clad

Doorsteps

Applicable Steel Grade :

It is a product that can realize lightweight compared to existing stainless steel products and can realize the effect of existing materials by utilizing exterior stainless steel, responding to the trend of lightweight automobiles.

CS-2PLY

CS-2PLY는 동 클래드의 한 종류로서, 동과 스테인리스를 압연 제작합니다. 동의 분율을 조정함으로써 열전도율을 향상시키거나 원가절감을 할 수 있는 소재입니다. 내측은 스테인리스 외측은 동으로 형상을 제작한 주방용품이나 정수기용 모듈에 사용됩니다.

No Data Found

No Data Found

specification

TypeCS-2PLY (Copper + Stainless)
Base materialSUS 304(L), 409(L), 430, 439, 409LThickness (mm)0.1 ~ 1.2
Layer materialCu 1020, 1100, 1220Width (mm)≤580
Available FormCoil, Sheet

CSC-3PLY

CSC-3PLY는 동클래드의 한 종류로서, 동 사이에 스테인리스를 넣어 압연 제작합니다. 압연하는 스테인리스의 종류에 따라 물성치를 조정이 가능하며, 경우에 따라 인청동 및 베릴륨동과 동등 수준의 물성치로 제작 가능하며, 전기전도도 향상을 시키며 원가 절감이 가능합니다. 

No Data Found

No Data Found

specification

TypeCSC-3PLY (Copper + Stainless + Copper)
Base materialSUS 304(L), 409(L), 439Thickness (mm)0.1 ~ 1.5
Layer materialCu 1020, 1100, 7521Width (mm)≤580
Available FormCoil, Sheet

CAC-3PLY

CAC-3PLY는 동 클래드의 한 종류로서, 두 시트 사이에 알루미늄 시트를 넣어 압연하여 제작합니다. 기본 소재보다 원가를 20% 절감하며 40% 정도 가벼운 소재입니다.

No Data Found

No Data Found

specification

Type CAC-3PLY (Copper + Aluminum + Copper)
Base material Al 1050 Thickness (mm) 0.8 ~ 4.0
Layer material Cu 1020, 1100 Width (mm) ≤580
Available Form Coil, Sheet

CA-2PLY

CA-2PLY는 동 클래드의 한 종류로서, 동과 알루미늄을 압연하여 제작합니다. 동의 분율을 조정함으로써 전도율을 향상시키거나, 원가절감, 경량화가 가능합니다.
전식 솔루션 소재로서 동과 알루미늄의 전위차에 의한 부식을 없애며, 용접성을 향상시키는 호환성 소재입니다. 

No Data Found

No Data Found

specification

TypeCA-2PLY (Copper + Aluminum)
Base materialAl 1050Thickness (mm)0.5 ~ 4.0
Layer materialCu 1020, 1100Width (mm)≤580
Available FormCoil, Sheet

SA-2PLY

SA-2PLY는 스테인리스 클래드의 한 종류로서, 스테인리스와 알루미늄을 압연 제작합니다. 스테인리스의 비해 뛰어난 열전도성을 가지면서 스테인리스의 우수한 강도를 확보한 소재로서 한 쪽 표면이 스테인리스로 이루어져 있어 내식성이 뛰어납니다. 또한, 스테인리스 대비 경량화가 가능합니다.

No Data Found

No Data Found

specification

TypeSA-2PLY (Stainless + Aluminum)
Base materialAl 1050, 3003, 5052Thickness (mm)0.6 ~ 6.5T
Layer materialSUS 304, 316L, 439Width (mm)≤1219
Available FormCoil, Sheet

SAS-3PLY

SAS-3PLY는 스테인리스 클래드의 한 종류로서, 스테인리스 사이에 알루미늄을 넣어 압연 제작합니다. 스테인리스의 비해 뛰어난 열전도성을 가지면서 스테인리스의 우수한 강도를 확보한 소재로서, 표면이 스테인리스로 이루어져 있어 내식성이 뛰어납니다. 또한, 외측의 스테인리스는 자성이 있는 400계 스테인리스를 사용함으로써 전자기 제품 이용이 가능합니다.

No Data Found

No Data Found

specification

TypeSAS-3PLY (Stainless + Aluminum + Stainless)
Base materialAl 1050, 3003Thickness (mm)0.8 ~ 8.0T
Layer materialSUS 300 series, 400 seriesWidth (mm)≤1219
Available FormCoil, Sheet

MA-2PLY

MA-2PLY는 철 클래드의 한 종류로서, 철과 알루미늄을 압연 제작합니다. 기존의 철에 비해 가벼우며, 알루미늄에 비해 강도가 우수해 공간이 제한적인 고강도 경량화 소재에 적합합니다. 또한, 기존 철과 다르게 방열성이 우수해, 마찰용접에도 뛰어난 효과가 있습니다. 
적용 제품: 베어링, 오일 팬 외

No Data Found

No Data Found

specification

TypeMA-2PLY (Mild Steel + Aluminum)
Base materialAl 1050Thickness (mm)0.2 ~ 4.0
Layer materialMild steelWidth (mm)≤1219
Available FormCoil, Sheet

MAM-3PLY

MAM-3PLY는 철 클래드의 한 종류로서, 철 사이에 알루미늄을 넣어 압연 제작합니다. 기존의 철에 비해 가벼우며, 알루미늄에 비해 강도가 우수해 공간이 제한적인 고강도 경량화 소재에 적합합니다. 
적용 제품: 자동차 철재 부품 외

No Data Found

No Data Found

specification

TypeMAM-3PLY (Mild Steel + Aluminum +Mild Steel)
Base materialAl 1050 etc.Thickness (mm)0.8 ~ 4.0T
Layer materialMild steelWidth (mm)≤1219
Available FormCoil, Sheet
선호하는 언어를 선택하세요.

아래 목록에서 언어를 선택하시면
해당 언어로 번역됩니다. 

Select your Preferred language.

Choose your language from the list below, and it
will be translated into that language.

CS-2PLY

CS-2PLY is a type of copper clad, manufactured by rolling copper and stainless steel. It is a material that can improve thermal conductivity or reduce costs by adjusting the copper fraction. It is used in kitchen appliances and water purifier modules that are made of stainless steel on the inside and copper on the outside.

No Data Found

No Data Found

specification

Type CS-2PLY (Copper + Stainless)
Base material SUS 304(L), 409(L), 430, 439, 409L Thickness (mm) 0.1 ~ 1.2
Layer material Cu 1020, 1100, 1220 Width (mm) ≤580
Available Form Coil, Sheet

CSC-3PLY

CSC-3PLY is a type of copper clad, manufactured by rolling stainless steel between copper. The physical properties can be adjusted depending on the type of stainless steel being rolled, and in some cases, it can be manufactured with physical properties equivalent to those of phosphor bronze and beryllium copper, improving electrical conductivity and reducing costs.

No Data Found

No Data Found

specification

Type CSC-3PLY (Copper + Stainless + Copper)
Base material SUS 304(L), 409(L), 439 Thickness (mm) 0.1 ~ 1.5
Layer material Cu 1020, 1100, 7521 Width (mm) ≤580
Available Form Coil, Sheet

CAC-3PLY

CAC-3PLY is a type of copper clad and is manufactured by placing an aluminum sheet between two sheets and rolling it. It is a material that reduces costs by 20% and is about 40% lighter than basic materials.

No Data Found

No Data Found

specification

Type CAC-3PLY (Copper + Aluminum + Copper)
Base material Al 1050 Thickness (mm) 0.8 ~ 4.0
Layer material Cu 1020, 1100 Width (mm) ≤580
Available Form Coil, Sheet

CA-2PLY

CA-2PLYis a type of copper clad and is manufactured by rolling copper and aluminum. By adjusting the copper fraction, it is possible to improve conductivity, reduce costs, and reduce weight.
As an electrostatic solution material, it is a compatible material that eliminates corrosion caused by the potential difference between copper and aluminum and improves weldability.

No Data Found

No Data Found

specification

Type CA-2PLY (Copper + Aluminum)
Base material Al 1050 Thickness (mm) 0.5 ~ 4.0
Layer material Cu 1020, 1100 Width (mm) ≤580
Available Form Coil, Sheet

SA-2PLY

SA-2PLY is a type of stainless steel clad, manufactured by rolling stainless steel and aluminum. It is a material that has excellent thermal conductivity compared to stainless steel while securing the excellent strength of stainless steel. One surface is made of stainless steel, so it has excellent corrosion resistance. Additionally, it is possible to be lighter than stainless steel.

No Data Found

No Data Found

specification

Type SA-2PLY (Stainless + Aluminum)
Base material Al 1050, 3003, 5052 Thickness (mm) 0.6 ~ 6.5T
Layer material SUS 304, 316L, 439 Width (mm) ≤1219
Available Form Coil, Sheet

SAS-3PLY

SAS-3PLY is a type of stainless steel clad, made by rolling aluminum between stainless steel. It is a material that has excellent thermal conductivity compared to stainless steel while securing the excellent strength of stainless steel. The surface is made of stainless steel, so it has excellent corrosion resistance. Additionally, the outer stainless steel is made of magnetic 400 series stainless steel, making it possible to use it as an electromagnetic product.

No Data Found

No Data Found

specification

Type SAS-3PLY (Stainless + Aluminum + Stainless)
Base material Al 1050, 3003 Thickness (mm) 0.8 ~ 8.0T
Layer material SUS 300 series, 400 series Width (mm) ≤1219
Available Form Coil, Sheet

MA-2PLY

MA-2PLY is a type of iron clad, manufactured by rolling iron and aluminum. It is lighter than conventional steel and has superior strength compared to aluminum, making it suitable for use as a high-strength, lightweight material with limited space. In addition, unlike conventional steel, it has excellent heat dissipation properties, making it excellent for friction welding.
Applicable products: Bearings, oil pans, etc.

No Data Found

No Data Found

specification

Type MA-2PLY (Mild Steel + Aluminum)
Base material Al 1050 Thickness (mm) 0.2 ~ 4.0
Layer material Mild steel Width (mm) ≤1219
Available Form Coil, Sheet

MAM-3PLY

MAM-3PLY is a type of iron clad, made by rolling aluminum between iron. It is lighter than conventional steel and has superior strength compared to aluminum, making it suitable for use as a high-strength, lightweight material with limited space.
Applicable products: Automotive steel parts, etc.

No Data Found

No Data Found

specification

Type MAM-3PLY (Mild Steel + Aluminum +Mild Steel)
Base material Al 1050 etc. Thickness (mm) 0.8 ~ 4.0T
Layer material Mild steel Width (mm) ≤1219
Available Form Coil, Sheet