Youtube Instagram

Language

kitchen

Precision Engineering for a Better World

Stainless steel clad

Kitchen appliances

Applicable Steel Grade :
SAS-3PLY

SAS-3PLY is a material that combines the lightness and high thermal conductivity of aluminum with the high strength and aesthetic appearance of stainless steel by cladding stainless steel on both sides of aluminum, making it ideal for kitchen appliances.

It is also induction ready using magnetic 400 series stainless steel.

Copper Clad

Kitchen appliances

Applicable Steel Grade :
CS-2PLY

CS-2PLY is stainless steel clad with pure bronze, which has the aesthetic appearance and excellent thermal conductivity of pure bronze and the strength and formability of stainless steel bonding.

While most plated kitchen appliances will peel off over time, our CS-2PLY is more than 10 times thicker than plating, so you don’t have to worry about peeling.

Aluminum Clad

Kitchen appliances

Applicable Steel Grade :
AMA-3PLY

The AMA-3PLY is made of mild steel with aluminum cladding on both sides, and the magnetic properties of the steel allow for induction use. Of course, aluminum’s excellent thermal conductivity also allows for a wide range of colors on both sides.

You can also save money by using iron, which is cheaper than aluminum.

Applications

Electrical & Electronics
Automobile
Communications & Mobile
Water purifiers
Kitchen
Construct
Other applications

Recent News

Customer Center

SAS-3PLY

SAS-3PLY는 스테인리스 클래드의 한 종류로서, 스테인리스 사이에 알루미늄을 넣어 압연 제작합니다. 스테인리스의 비해 뛰어난 열전도성을 가지면서 스테인리스의 우수한 강도를 확보한 소재로서, 표면이 스테인리스로 이루어져 있어 내식성이 뛰어납니다. 또한, 외측의 스테인리스는 자성이 있는 400계 스테인리스를 사용함으로써 전자기 제품 이용이 가능합니다.

  • 향상된 가공성 (연신율 ↑, 강도 ≒)
  • 경량화 (30% ↓)
  • 원가절감 (10% ↓)
  • 우수한 열 성질 (전도율, 축열율 등)
  • I/H 사용 가능 (SUS 400계 사용)
  • 위생성
  • 우수한 내부식성

specification

TypeSAS-3PLY (Stainless + Aluminum + Stainless)
Base materialAl 1050, 3003Thickness (mm)0.8 ~ 8.0T
Layer materialSUS 300 series, 400 seriesWidth (mm)≤1219
Available FormCoil, Sheet

CS-2PLY

CS-2PLY는 동 클래드의 한 종류로서, 동과 스테인리스를 압연 제작합니다. 동의 분율을 조정함으로써 열전도율을 향상시키거나 원가절감을 할 수 있는 소재입니다. 내측은 스테인리스 외측은 동으로 형상을 제작한 주방용품이나 정수기용 모듈에 사용됩니다.

  • 미려한 외관 (산화발색 가능)
  • 우수한 강도 (용도에 따라 조절 가능)
  • 향상된 가공성 (연신율 ≒, 강도↑)
  • 원가 절감
  • 경량화 (11% ↓)
  • 가격경쟁력 (가격경쟁력 10~20%)
  • 우수한 열전도율 (∵동 분율 조정)
  • 위생성
  • 항균성

specification

TypeCS-2PLY (Copper + Stainless)
Base materialSUS 304(L), 409(L), 430, 439, 409LThickness (mm)0.1 ~ 1.2
Layer materialCu 1020, 1100, 1220Width (mm)≤580
Available FormCoil, Sheet

AMA-3PLY

AMA-3PLY는 알루미늄 클래드의 한 종류로서, 알루미늄 사이에 마일드 스틸을 넣어 압연 제작합니다. 기존의 철에 비해 가벼우며 알루미늄에 비해 강도가 우수해 공간이 제한적인 고강도 경량화 소재에 적합합니다. 또한 건축외장재로서 사용하여 알루미늄 대비 원가절감이 가능한 소재입니다. 

  • 향상된 가공성 (연신율 ≒, 강도 ↑)
  • 향상된 강도
  • 원가절감 (15% ↓)
  • 원가 절감 (강도 개선으로 얇은 두께 적용 가능)
  • 알루미늄 표면 다양한 색 구현 가능
  • 낮은 열 팽창도
  • 우수한 열 전도율
  • I/H 사용 가능 (SUS 400계 사용)

specification

TypeAMA-3PLY (Aluminum + Mild Steel + Aluminum)
Base materialMild steelThickness (mm)0.6 ~ 2.5
Layer materialAl 1050, 3003Width (mm)≤1219
Available FormCoil, Sheet
선호하는 언어를 선택하세요.

아래 목록에서 언어를 선택하시면
해당 언어로 번역됩니다. 

Select your Preferred language.

Choose your language from the list below, and it
will be translated into that language.

SAS-3PLY

SAS-3PLY is a type of stainless steel clad, made by rolling aluminum between stainless steel. It is a material that has excellent thermal conductivity compared to stainless steel while securing the excellent strength of stainless steel. The surface is made of stainless steel, so it has excellent corrosion resistance. Additionally, the outer stainless steel is made of magnetic 400 series stainless steel, making it possible to use it as an electromagnetic product.

  • Improved processability (elongation ↑, strength ≒)
  • Lightweight (30% ↓)
  • Cost reduction (10% ↓)
  • Excellent thermal properties (conductivity, heat storage rate, etc.)
  • I/H available (SUS 400 series used)
  • Hygiene
  • Excellent corrosion resistance

specification

Type SAS-3PLY (Stainless + Aluminum + Stainless)
Base material Al 1050, 3003 Thickness (mm) 0.8 ~ 8.0T
Layer material SUS 300 series, 400 series Width (mm) ≤1219
Available Form Coil, Sheet

CS-2PLY

CS-2PLY is a type of copper clad, manufactured by rolling copper and stainless steel. It is a material that can improve thermal conductivity or reduce costs by adjusting the copper fraction. It is used in kitchen appliances and water purifier modules that are made of stainless steel on the inside and copper on the outside.

  • Beautiful appearance (oxidation possible)
  • Excellent strength (adjustable depending on application)
  • Improved processability (elongation ≒, strength ↑)
  • Cost Reduction
  • Lightweight (11% ↓)
  • Price competitiveness (price competitiveness 10-20%)
  • Excellent thermal conductivity (∵copper fraction adjustment)
  • Hygiene
  • antibacterial

specification

Type CS-2PLY (Copper + Stainless)
Base material SUS 304(L), 409(L), 430, 439, 409L Thickness (mm) 0.1 ~ 1.2
Layer material Cu 1020, 1100, 1220 Width (mm) ≤580
Available Form Coil, Sheet

AMA-3PLY

AMA-3PLY is a type of aluminum clad, made by rolling mild steel between aluminum. It is lighter than conventional steel and has superior strength compared to aluminum, making it suitable for high-strength, lightweight materials with limited space. In addition, it is a material that can be used as a building exterior material to reduce costs compared to aluminum.

  • Improved processability (elongation ≒, strength ↑)
  • improved strength
  • Cost reduction (15% ↓)
  • Cost reduction (lower thickness can be applied due to improved strength)
  • Aluminum surface available in various colors
  • low thermal expansion
  • Excellent thermal conductivity
  • I/H available (SUS 400 series used)

specification

Type AMA-3PLY (Aluminum + Mild Steel + Aluminum)
Base material Mild steel Thickness (mm) 0.6 ~ 2.5
Layer material Al 1050, 3003 Width (mm) ≤1219
Available Form Coil, Sheet