copper clad metal
CAC-3PLY
CAC-3PLY is a type of copper clad and is manufactured by placing an aluminum sheet between two sheets and rolling it. It is a material that reduces costs by 20% and is about 40% lighter than basic materials.
- Excellent electrical conductivity (70% compared to copper)
- Cost reduction (20% ↓)
- Lightweight (40% ↓)
- antibacterial
No Data Found
No Data Found
specification
| Type | CAC-3PLY (Copper + Aluminum + Copper) | ||
|---|---|---|---|
| Base material | Al 1050 | Thickness (mm) | 0.5 ~ 4.0 |
| Layer material | Cu 1020, 1100 | Width (mm) | ≤580 |
| Available Form | Coil, Sheet | ||
Application
Busbar
Busbar
CMC-3PLY
CMC-3PLY is a type of copper clad and is manufactured by placing mild steel between two sheets and rolling it. Not only does the strength improve, but it also oxidizes over time and boasts a beautiful appearance.
- Excellent electrical conductivity (35% compared to copper)
- Lightweight (10% ↓)
- Cost reduction (35% ↓)
- Beautiful appearance (oxidation possible)
- improved strength
- antibacterial
No Data Found
No Data Found
specification
| Type | CMC-3PLY (Copper + Mild Steel + Copper) | ||
|---|---|---|---|
| Base material | Mild steel | Thickness (mm) | 0.1 ~ 2.0 |
| Layer material | Cu 1100 | Width (mm) | ≤580 |
| Available Form | Coil, Sheet | ||
Application
electrical contact point
Antimicrobial Copper Products
CSC-3PLY
CSC-3PLY is a type of copper clad, manufactured by rolling stainless steel between copper. The physical properties can be adjusted depending on the type of stainless steel being rolled, and in some cases, it can be manufactured with physical properties equivalent to those of phosphor bronze and beryllium copper, improving electrical conductivity and reducing costs.
- Beautiful appearance (oxidation possible)
- Excellent strength (adjustable depending on application)
- Improved processability (elongation ≒, strength ↑)
- Cost reduction (30% ↓)
- Excellent electrical conductivity (35% compared to copper)
- Lightweight (11.5% ↓)
- antibacterial
No Data Found
No Data Found
specification
| Type | CSC-3PLY (Copper + Stainless + Copper) | ||
|---|---|---|---|
| Base material | SUS 304(L), 409(L), 439 | Thickness (mm) | 0.1 ~ 1.5 |
| Layer material | Cu 1020, 1100, 7521 | Width (mm) | ≤580 |
| Available Form | Coil, Sheet | ||
Application
High-strength spring terminal
Building exterior materials
Antibacterial products
Oil cooler, etc.
CS-2PLY
CS-2PLY is a type of copper clad, manufactured by rolling copper and stainless steel. It is a material that can improve thermal conductivity or reduce costs by adjusting the copper fraction. It is used in kitchen appliances and water purifier modules that are made of stainless steel on the inside and copper on the outside.
- Beautiful appearance (oxidation possible)
- Excellent strength (adjustable depending on application)
- Improved processability (elongation ≒, strength ↑)
- Cost Reduction
- Lightweight (11% ↓)
- Price competitiveness (price competitiveness 10-20%)
- Excellent thermal conductivity (∵copper fraction adjustment)
- Hygiene
- antibacterial
No Data Found
No Data Found
specification
| Type | CS-2PLY (Copper + Stainless) | ||
|---|---|---|---|
| Base material | SUS 304(L), 409(L), 430, 439, 409L | Thickness (mm) | 0.1 ~ 1.2 |
| Layer material | Cu 1020, 1100, 1220 | Width (mm) | ≤580 |
| Available Form | Coil, Sheet | ||
Application
gutter downspout
water purifier heating plate
Interior, Exterior
Kitchen appliances
CA-2PLY
CA-2PLY is a type of copper clad and is manufactured by rolling copper and aluminum. By adjusting the copper fraction, it is possible to improve conductivity, reduce costs, and reduce weight.
As an electrostatic solution material, it is a compatible material that eliminates corrosion caused by the potential difference between copper and aluminum and improves weldability.
- Solving electric corrosion by potential difference
- Improved weldability due to welding by material
- Cost reduction due to defect improvement and process improvement
- Lightweight (40%)
No Data Found
No Data Found
specification
| Type | CA-2PLY (Copper + Aluminum) | ||
|---|---|---|---|
| Base material | Al 1050 | Thickness (mm) | 0.5 ~ 4.0 |
| Layer material | Cu 1020, 1100 | Width (mm) | ≤580 |
| Available Form | Coil, Sheet | ||
Application
