Water purifiers

Precision Engineering for a Better World

Stainless steel clad

Cold Plates

Applicable Steel Grade :

SA-2PLY is a combination of stainless steel and aluminum and is used in the cold water reservoir of water dispensers to provide superior cooling, a feature that is difficult to achieve with a single material.

The surface that directly comes into contact with water is made of stainless steel to enhance hygiene, and the plating layer peeling phenomenon, which was a concern in previous plating products, is eliminated to ensure safe water quality. Aluminum’s excellent thermal conductivity makes it well-suited to rapid temperature changes.

Ice maker Eva (evaporator)

Applicable Steel Grade :

The CS-2PLY and SCS-3PLY are a combination of copper and stainless steel and can be used for evaporators used for ice cooling, such as evaporators for water dispensers and ice machines. Unlike traditional copper plated products, stainless steel is used to ensure hygiene and reliability.

Our clad ice machine eva has excellent cooling capabilities and after ice creation, the ice is effectively separated due to its fast thermal conductivity.

Copper Clad

Hotplate

Applicable Steel Grade :

CS-2PLY is a functional material that combines copper and stainless steel, possessing both the smooth electrical conductivity of the copper layer and the hygienic properties of the stainless steel layer, which can be applied to the instant hot water method, enabling slimmer water purifiers and stable hot water supply.

SA-2PLY

SA-2PLY는 스테인리스 클래드의 한 종류로서, 스테인리스와 알루미늄을 압연 제작합니다. 스테인리스의 비해 뛰어난 열전도성을 가지면서 스테인리스의 우수한 강도를 확보한 소재로서 한 쪽 표면이 스테인리스로 이루어져 있어 내식성이 뛰어납니다. 또한, 스테인리스 대비 경량화가 가능합니다.

No Data Found

No Data Found

specification

TypeSA-2PLY (Stainless + Aluminum)
Base materialAl 1050, 3003, 5052Thickness (mm)0.6 ~ 6.5T
Layer materialSUS 304, 316L, 439Width (mm)≤1219
Available FormCoil, Sheet

CS-2PLY

CS-2PLY는 동 클래드의 한 종류로서, 동과 스테인리스를 압연 제작합니다. 동의 분율을 조정함으로써 열전도율을 향상시키거나 원가절감을 할 수 있는 소재입니다. 내측은 스테인리스 외측은 동으로 형상을 제작한 주방용품이나 정수기용 모듈에 사용됩니다.

No Data Found

No Data Found

specification

TypeCS-2PLY (Copper + Stainless)
Base materialSUS 304(L), 409(L), 430, 439, 409LThickness (mm)0.1 ~ 1.2
Layer materialCu 1020, 1100, 1220Width (mm)≤580
Available FormCoil, Sheet

SCS-3PLY

SCS-3PLY는 스테인리스 클래드의 한 종류로서, 스테인리스 사이에 동을 넣어 압연 제작합니다. 스테인리스의 비해 뛰어난 열전도성을 가지면서 스테인리스의 우수한 강도를 확보한 소재로서, 표면이 스테인리스로 이루어져 있어 내식성이 뛰어나 제한적인 공가의 고강도 방열성이 필요한 곳에 사용됩니다. 

No Data Found

No Data Found

specification

TypeSCS-3PLY (Stainless + Copper + Stainless)
Base materialCu1100, 1220Thickness (mm)0.1 ~ 1.6T
Layer materialSUS 304(L), 409(L), 316(L), 439Width (mm)≤580
Available FormCoil, Sheet
선호하는 언어를 선택하세요.

아래 목록에서 언어를 선택하시면
해당 언어로 번역됩니다. 

Select your Preferred language.

Choose your language from the list below, and it
will be translated into that language.

SA-2PLY

SA-2PLY is a type of stainless steel clad, manufactured by rolling stainless steel and aluminum. It is a material that has excellent thermal conductivity compared to stainless steel while securing the excellent strength of stainless steel. One surface is made of stainless steel, so it has excellent corrosion resistance. Additionally, it is possible to be lighter than stainless steel.

No Data Found

No Data Found

specification

Type SA-2PLY (Stainless + Aluminum)
Base material Al 1050, 3003, 5052 Thickness (mm) 0.6 ~ 6.5T
Layer material SUS 304, 316L, 439 Width (mm) ≤1219
Available Form Coil, Sheet

CS-2PLY

CS-2PLY is a type of copper clad, manufactured by rolling copper and stainless steel. It is a material that can improve thermal conductivity or reduce costs by adjusting the copper fraction. It is used in kitchen appliances and water purifier modules that are made of stainless steel on the inside and copper on the outside.

No Data Found

No Data Found

specification

Type CS-2PLY (Copper + Stainless)
Base material SUS 304(L), 409(L), 430, 439, 409L Thickness (mm) 0.1 ~ 1.2
Layer material Cu 1020, 1100, 1220 Width (mm) ≤580
Available Form Coil, Sheet

SCS-3PLY

SCS-3PLY is a type of stainless steel clad, manufactured by rolling copper between stainless steel. It is a material that has excellent thermal conductivity compared to stainless steel while securing the excellent strength of stainless steel. Since the surface is made of stainless steel, it has excellent corrosion resistance and is used in places where high-strength heat dissipation with limited work cost is required.

No Data Found

No Data Found

specification

Type SCS-3PLY (Stainless + Copper + Stainless)
Base material Cu1100, 1220 Thickness (mm) 0.1 ~ 1.6T
Layer material SUS 304(L), 409(L), 316(L), 439 Width (mm) ≤580
Available Form Coil, Sheet