Language

Other Applications

Precision Engineering for a Better World

Copper Clad

Antimicrobial Copper Products

Applicable Steel Grade :

Our copper clad products are also widely used in products that utilize the antimicrobial properties of pure copper. By taking the antimicrobial properties of existing pure copper and cladding it with iron, stainless steel, aluminum, etc.

The use of these copper clads is a major contributor to the low penetration of antimicrobial copper products.

Warhead Cup

Applicable Steel Grade :

This is a typical example of cladding application in the defense industry, where cladding is applied to rifle warheads that were previously used as brass, reducing the weight of the bullet to make it more portable and increasing the strength of the warhead through its base material, mild steel, to meet the purpose of the warhead.

In particular, by supplying cladding products domestically, which were previously imported, we are able to secure materials, control quality, and reduce costs with low unit prices.

Aluminum Clad

Air Cooled Heat Exchangers Air Cooled Heat Exchangers (ACHE)

Applicable Steel Grade :

It is a groundbreaking product that is applied to a heat exchanger that uses air as a cooling medium instead of coolant to cool the internal fluid by forcibly ventilating it, thereby performing effective heat dissipation and cooling functions while extending its life due to the strength of the base material, mild steel, and solving the problem of securing strength.

Other Clads

Titanium Spectacle Frames

It is a breakthrough product that combines the high strength and lightness of titanium with the hygiene and cost-saving benefits of stainless steel, allowing you to enjoy the characteristics of expensive titanium without sacrificing cost.

CSC-3PLY

CSC-3PLY는 동클래드의 한 종류로서, 동 사이에 스테인리스를 넣어 압연 제작합니다. 압연하는 스테인리스의 종류에 따라 물성치를 조정이 가능하며, 경우에 따라 인청동 및 베릴륨동과 동등 수준의 물성치로 제작 가능하며, 전기전도도 향상을 시키며 원가 절감이 가능합니다. 

No Data Found

No Data Found

specification

TypeCSC-3PLY (Copper + Stainless + Copper)
Base materialSUS 304(L), 409(L), 439Thickness (mm)0.1 ~ 1.5
Layer materialCu 1020, 1100, 7521Width (mm)≤580
Available FormCoil, Sheet

CMC-3PLY

CMC-3PLY는 동 클래드의 한 종류로서, 두 시트 사이에 마일드 스틸을 넣어 압연하여 제작합니다. 강도가 향상될 뿐만 아니라 시간이 지날수록 산화 발색되어 미려한 외관을 자랑합니다. 

No Data Found

No Data Found

specification

TypeCMC-3PLY (Copper + Mild Steel + Copper)
Base materialMild steelThickness (mm)0.1 ~ 2.0
Layer materialCu 1100Width (mm)≤580
Available FormCoil, Sheet

BMB-3PLY

BMB-3PLY는 단동 클래드의 한 종류로서, 단동 사이에 마일드 스틸을 넣어 압연 제작합니다. 기존의 황동 및 단동에 비해, 우수한 열전도성에 의해 단동에 비해 휘광성이 뛰어나며, 향상된 경량화와 강도로 가공성이 우수하여 보다 변형이 없는 탄두를 만들 수 있습니다. 
적용 제품: 탄두컵 외

No Data Found

No Data Found

specification

TypeBMB-3PLY (Brass + Mild Steel + Brass)
Base materialMild steelThickness (mm)0.4 ~ 2.0T
Layer materialBrassWidth (mm)≤580
Available FormCoil, Sheet

AMA-3PLY

AMA-3PLY는 알루미늄 클래드의 한 종류로서, 알루미늄 사이에 마일드 스틸을 넣어 압연 제작합니다. 기존의 철에 비해 가벼우며 알루미늄에 비해 강도가 우수해 공간이 제한적인 고강도 경량화 소재에 적합합니다. 또한 건축외장재로서 사용하여 알루미늄 대비 원가절감이 가능한 소재입니다. 

No Data Found

No Data Found

specification

TypeAMA-3PLY (Aluminum + Mild Steel + Aluminum)
Base materialMild steelThickness (mm)0.6 ~ 2.5
Layer materialAl 1050, 3003Width (mm)≤1219
Available FormCoil, Sheet
선호하는 언어를 선택하세요.

아래 목록에서 언어를 선택하시면
해당 언어로 번역됩니다. 

Select your Preferred language.

Choose your language from the list below, and it
will be translated into that language.

CSC-3PLY

CSC-3PLY is a type of copper clad, manufactured by rolling stainless steel between copper. The physical properties can be adjusted depending on the type of stainless steel being rolled, and in some cases, it can be manufactured with physical properties equivalent to those of phosphor bronze and beryllium copper, improving electrical conductivity and reducing costs.

No Data Found

No Data Found

specification

Type CSC-3PLY (Copper + Stainless + Copper)
Base material SUS 304(L), 409(L), 439 Thickness (mm) 0.1 ~ 1.5
Layer material Cu 1020, 1100, 7521 Width (mm) ≤580
Available Form Coil, Sheet

CMC-3PLY

CMC-3PLY is a type of copper clad and is manufactured by placing mild steel between two sheets and rolling it. Not only does the strength improve, but it also oxidizes over time and boasts a beautiful appearance.

No Data Found

No Data Found

specification

Type CMC-3PLY (Copper + Mild Steel + Copper)
Base material Mild steel Thickness (mm) 0.1 ~ 2.0
Layer material Cu 1100 Width (mm) ≤580
Available Form Coil, Sheet

BMB-3PLY

BMB-3PLY is a type of single-acting clad, manufactured by rolling mild steel between single-acting cladding. Compared to existing brass and single copper, it has excellent brilliance compared to single copper due to its excellent thermal conductivity, and has excellent processability due to improved weight and strength, enabling the production of warheads with less deformation.
Applicable products: Warhead cup, etc.

No Data Found

No Data Found

specification

Type BMB-3PLY (Brass + Mild Steel + Brass)
Base material Mild steel Thickness (mm) 0.4 ~ 2.0T
Layer material Brass Width (mm) ≤580
Available Form Coil, Sheet

AMA-3PLY

AMA-3PLY is a type of aluminum clad, made by rolling mild steel between aluminum. It is lighter than conventional steel and has superior strength compared to aluminum, making it suitable for high-strength, lightweight materials with limited space. In addition, it is a material that can be used as a building exterior material to reduce costs compared to aluminum.

No Data Found

No Data Found

specification

Type AMA-3PLY (Aluminum + Mild Steel + Aluminum)
Base material Mild steel Thickness (mm) 0.6 ~ 2.5
Layer material Al 1050, 3003 Width (mm) ≤1219
Available Form Coil, Sheet